Flare Removal (dart E)#

カメラが強い光源に向けられている場合、生成される写真にはレンズフレアのアーティファクトが含まれる場合があります。フレア除去オートファンクションを使用すると、これらのアーティファクトを除去できます。

機能を使用する#

To enable or disable flare removal, set the BslFlareRemovalAuto parameter to one of the following operating modes:

Continuous: The camera removes lens flare artifacts continuously while images are being acquired.
Off: Disables the Flare Removal auto function.

サンプルコード#

C++ (Native)C++ (Generic)C#C (Generic)Python

// Enable Flare Removal by setting the operating mode to Continuous
camera.BslFlareRemovalAuto.SetValue(BslFlareRemovalAuto_Continuous);

INodeMap& nodemap = camera.GetNodeMap();
// Enable Flare Removal by setting the operating mode to Continuous
CEnumParameter(nodemap, "BslFlareRemovalAuto").SetValue("Continuous");

// Enable Flare Removal by setting the operating mode to Continuous
camera.Parameters[PLCamera.BslFlareRemovalAuto].SetValue(PLCamera.BslFlareRemovalAuto.Continuous);

/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
/* Enable Flare Removal by setting the operating mode to Continuous */
errRes = PylonDeviceFeatureFromString(hdev, "BslFlareRemovalAuto", "Continuous");
CHECK(errRes);

# Enable Flare Removal by setting the operating mode to Continuous
camera.BslFlareRemovalAuto.Value = "Continuous"

pylonViewerアを使用して、パラメーターを簡単に設定することもできます。