コンテンツにスキップ

User Sets#

User Setsカメラ機能を使用すると、カメラ設定を保存またはロードできます。カメラの起動時にロードする設定を指定することもできます。

ユーザーセット(「設定セット」とも呼ばれます)は、パラメーター値のグループです。カメラを制御するために必要なすべてのパラメーター設定が含まれていますが、いくつか例外があります。

一部のユーザーセットはプリセットされており、読み取り専用です。これらのユーザーセットは、「工場出荷時セット」とも呼ばれます。

機能を使用する#

User Setの内容#

各ユーザーセットには、すべてのカメラパラメーターの値が含まれますが、次の例外があります。

  • 次のカメラ機能に関連するパラメーター値は含まれません

  • ace Classic/U/Lカメラでは、LUTカメラ機能に関連するパラメーター値も含まれません

  • Values of parameters that include the term "Selector" in their names are not included (e.g., GainSelector). Exceptions: TestImageSelector, GammaSelector, LightSourceSelector.
  • The value of the DeviceUserID parameter is not included.
  • The value of the GevGVSPExtendedIDMode parameter is not included.
  • Only the following ネットワーク関連パラメーター are included:
    • Packet Size (GevSCPSPacketSize)
    • Inter-Packet Delay (GevSCPD)
    • Frame Transmission Delay (GevSCFTD)
    • Bandwidth Reserve (GevSCBWR)
    • Bandwidth Reserve Accumulation (GevSCBWRA)
    • Bandwidth Reserve Mode (BandwidthReserveMode)

つまり、ユーザーセットをロードまたは保存すると、上記のパラメーターを除くすべてのカメラパラメーターの値がロードまたは保存されます。

User Setのロード#

情報

  • ユーザーセットがロードされると、現在のカメラ設定が上書きされます。
  • ユーザーセットのロードは、カメラがアイドル状態のとき(画像取得中ではないとき)にのみ可能です。
  1. Set the UserSetSelector parameter to one of the available user sets, e.g., UserSet1.
  2. Execute the UserSetLoad command.

User Setの保存#

情報

  • Only the UserSet1, UserSet2, and UserSet3 user sets can be saved. The other user sets are read-only.
  • ユーザーセットの保存は、カメラがアイドル状態のとき(画像取得中ではないとき)にのみ可能です。
  1. Set the UserSetSelector parameter to one of the available user sets, e.g., UserSet1.
  2. Execute the UserSetSave command.

Startup Setの選択#

情報

  • スタートアップセットとして選択したユーザーセットは、カメラの電源がオンになるとロードされます。
  • スタートアップセットを選択できるのは、カメラがアイドル状態のとき(画像取得中でないとき)のみです。
  1. Set the UserSetDefault parameter to one of the available user sets, e.g., UserSet1.
  2. 新しいスタートアップセットが有効になるように、カメラの電源を入れ直します。

使用可能なUser Sets#

カメラのモデルに応じて、次のユーザーセットを使用できます。

Default#

The Default user set is a read-only factory set. This is the default startup set on all cameras, except Basler MED ace cameras.

このセットをロードすると、平均的な動作条件でのさまざまな用途に適したカメラパフォーマンスを提供するようにカメラが設定されます。

The Default user set contains the factory default settings of all the camera's parameter values.

High Gain#

The HighGain user set is a read-only factory set.

このセットをロードすると、ゲインが6dB増加します。

The HighGain user set contains the same parameter values as the Default user set, with the following exception:

  • If available, the Gain parameter is set to a value that increases the gain by 6 dB compared to the Default user set. The actual parameter value varies by camera model.

Auto Functions#

The AutoFunctions user set is a read-only factory set.

このユーザーセットをロードすると、カメラのExposure AutoおよびGain Auroオートファンクションが有効になります。

The AutoFunctions user set contains the same parameter values as the Default user set, with the following exceptions:

カラー#

The Color user set is a read-only factory set.

このユーザーセットをロードすると、最も一般的な照明条件下で良好なカラー画像を生成するようにカメラが設定されます。

The Color user set contains the same parameter values as the Default user set, with the following exceptions:

Color Raw#

The ColorRaw user set is a read-only factory set.

このセットをロードすると、カラー拡張機能が無効になります。

The ColorRaw user set contains the same parameter values as the Default user set, with the following exceptions:

Light Microscopy#

The LightMicroscopy user set is a read-only factory set. This is the default startup set on Basler MED ace cameras.

このセットをロードすると、光学顕微鏡で良好な画像を生成するようにカメラが設定されます。

The LightMicroscopy user set contains the same parameter values as the Default user set, with the following exceptions:

  • The ExposureAuto parameter is set to Continuous.
  • The AutoFunctionProfile parameter is set to MinimizeGainQuick.
  • The AutoTargetBrightness parameter is set to 0.592.
  • The AutoFunctionROIUseTonalRange parameter is set to true.
  • The BslBrightness parameter is set to -0.0625.
  • The BslContrast parameter is set to 0.15625.
  • イメージ SharpnessEnhancement パラメーターは次の値に設定されます。
    • acA2440-35umMEDおよびacA2440-75umMEDカメラ:1.7
    • acA2500-20gmMEDカメラ:2.2
    • その他のBasler MED aceカメラ:3.7
  • On color cameras, the LightSourcePreset parameter is set to Daylight6500K.
  • On color cameras, the PixelFormat parameter is set to RGB8.
  • On color cameras, the DemosaicingMode parameter is set to BaslerPGI.
  • On mono cameras, the PgiMode parameter is set to On.

User Set 1, User Set 2, and User Set 3#

You can use the UserSet1, UserSet2, and UserSet3 user sets to load and save your own camera settings.

Initially, these user sets contain the same parameter values as the Default user set. You can overwrite those values with your own settings to create a user set that is customized for your application.

カメラをリセットするたびにこれらの設定を復元するには、スタートアップセットとしてユーザーセットを選択します。

特性#

すべてのカメラモデルを表示します

カメラモデル 使用可能なUser Sets
a2A640-240gmSWIR User Set 1
User Set 2
User Set 3
Default
a2A640-240umSWIR User Set 1
User Set 2
User Set 3
Default
a2A1280-80gmSWIR User Set 1
User Set 2
User Set 3
Default
a2A1280-125umSWIR User Set 1
User Set 2
User Set 3
Default
a2A1920-51gcBAS User Set 1
User Set 2
User Set 3
Default
a2A1920-51gcPRO User Set 1
User Set 2
User Set 3
Default
a2A1920-51gmBAS User Set 1
User Set 2
User Set 3
Default
a2A1920-51gmPRO User Set 1
User Set 2
User Set 3
Default
a2A1920-160ucBAS User Set 1
User Set 2
User Set 3
Default
a2A1920-160ucPRO User Set 1
User Set 2
User Set 3
Default
a2A1920-160umBAS User Set 1
User Set 2
User Set 3
Default
a2A1920-160umPRO User Set 1
User Set 2
User Set 3
Default
a2A1920-165g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A1920-165g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A2440-98g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A2440-98g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-23gcBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-23gcPRO User Set 1
User Set 2
User Set 3
Default
a2A2448-23gmBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-23gmPRO User Set 1
User Set 2
User Set 3
Default
a2A2448-75ucBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-75ucPRO User Set 1
User Set 2
User Set 3
Default
a2A2448-75umBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-75umPRO User Set 1
User Set 2
User Set 3
Default
a2A2448-105g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-105g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A2448-120cc User Set 1
User Set 2
User Set 3
Default
a2A2448-120cm User Set 1
User Set 2
User Set 3
Default
a2A2448-210cc User Set 1
User Set 2
User Set 3
Default
a2A2448-210cm User Set 1
User Set 2
User Set 3
Default
a2A2590-22gcBAS User Set 1
User Set 2
User Set 3
Default
a2A2590-22gcPRO User Set 1
User Set 2
User Set 3
Default
a2A2590-22gmBAS User Set 1
User Set 2
User Set 3
Default
a2A2590-22gmPRO User Set 1
User Set 2
User Set 3
Default
a2A2590-60ucBAS User Set 1
User Set 2
User Set 3
Default
a2A2590-60ucPRO User Set 1
User Set 2
User Set 3
Default
a2A2590-60umBAS User Set 1
User Set 2
User Set 3
Default
a2A2590-60umPRO User Set 1
User Set 2
User Set 3
Default
a2A2600-20gcBAS User Set 1
User Set 2
User Set 3
Default
a2A2600-20gcPRO User Set 1
User Set 2
User Set 3
Default
a2A2600-20gmBAS User Set 1
User Set 2
User Set 3
Default
a2A2600-20gmPRO User Set 1
User Set 2
User Set 3
Default
a2A2600-64ucBAS User Set 1
User Set 2
User Set 3
Default
a2A2600-64ucPRO User Set 1
User Set 2
User Set 3
Default
a2A2600-64umBAS User Set 1
User Set 2
User Set 3
Default
a2A2600-64umPRO User Set 1
User Set 2
User Set 3
Default
a2A2840-14gcBAS User Set 1
User Set 2
User Set 3
Default
a2A2840-14gcPRO User Set 1
User Set 2
User Set 3
Default
a2A2840-14gmBAS User Set 1
User Set 2
User Set 3
Default
a2A2840-14gmPRO User Set 1
User Set 2
User Set 3
Default
a2A2840-14gmUV User Set 1
User Set 2
User Set 3
Default
a2A2840-48ucBAS User Set 1
User Set 2
User Set 3
Default
a2A2840-48ucPRO User Set 1
User Set 2
User Set 3
Default
a2A2840-48umBAS User Set 1
User Set 2
User Set 3
Default
a2A2840-48umPRO User Set 1
User Set 2
User Set 3
Default
a2A2840-48umUV User Set 1
User Set 2
User Set 3
Default
a2A2840-67g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A2840-67g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A2840-67g5mUV User Set 1
User Set 2
User Set 3
Default
a2A2840-86cc User Set 1
User Set 2
User Set 3
Default
a2A2840-86cm User Set 1
User Set 2
User Set 3
Default
a2A3840-13gcBAS User Set 1
User Set 2
User Set 3
Default
a2A3840-13gcPRO User Set 1
User Set 2
User Set 3
Default
a2A3840-13gmBAS User Set 1
User Set 2
User Set 3
Default
a2A3840-13gmPRO User Set 1
User Set 2
User Set 3
Default
a2A3840-45ucBAS User Set 1
User Set 2
User Set 3
Default
a2A3840-45ucPRO User Set 1
User Set 2
User Set 3
Default
a2A3840-45umBAS User Set 1
User Set 2
User Set 3
Default
a2A3840-45umPRO User Set 1
User Set 2
User Set 3
Default
a2A4096-9gcBAS User Set 1
User Set 2
User Set 3
Default
a2A4096-9gcPRO User Set 1
User Set 2
User Set 3
Default
a2A4096-9gmBAS User Set 1
User Set 2
User Set 3
Default
a2A4096-9gmPRO User Set 1
User Set 2
User Set 3
Default
a2A4096-30ucBAS User Set 1
User Set 2
User Set 3
Default
a2A4096-30ucPRO User Set 1
User Set 2
User Set 3
Default
a2A4096-30umBAS User Set 1
User Set 2
User Set 3
Default
a2A4096-30umPRO User Set 1
User Set 2
User Set 3
Default
a2A4096-44g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A4096-44g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A4096-67cc User Set 1
User Set 2
User Set 3
Default
a2A4096-67cm User Set 1
User Set 2
User Set 3
Default
a2A4200-12gcBAS User Set 1
User Set 2
User Set 3
Default
a2A4200-12gcPRO User Set 1
User Set 2
User Set 3
Default
a2A4200-12gmBAS User Set 1
User Set 2
User Set 3
Default
a2A4200-12gmPRO User Set 1
User Set 2
User Set 3
Default
a2A4200-40ucBAS User Set 1
User Set 2
User Set 3
Default
a2A4200-40ucPRO User Set 1
User Set 2
User Set 3
Default
a2A4200-40umBAS User Set 1
User Set 2
User Set 3
Default
a2A4200-40umPRO User Set 1
User Set 2
User Set 3
Default
a2A4504-5gcBAS User Set 1
User Set 2
User Set 3
Default
a2A4504-5gcPRO User Set 1
User Set 2
User Set 3
Default
a2A4504-5gmBAS User Set 1
User Set 2
User Set 3
Default
a2A4504-5gmPRO User Set 1
User Set 2
User Set 3
Default
a2A4504-18ucBAS User Set 1
User Set 2
User Set 3
Default
a2A4504-18ucPRO User Set 1
User Set 2
User Set 3
Default
a2A4504-18umBAS User Set 1
User Set 2
User Set 3
Default
a2A4504-18umPRO User Set 1
User Set 2
User Set 3
Default
a2A4504-27g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A4504-27g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A4504-42cc User Set 1
User Set 2
User Set 3
Default
a2A4504-42cm User Set 1
User Set 2
User Set 3
Default
a2A4508-6gcBAS User Set 1
User Set 2
User Set 3
Default
a2A4508-6gcPRO User Set 1
User Set 2
User Set 3
Default
a2A4508-6gmBAS User Set 1
User Set 2
User Set 3
Default
a2A4508-6gmPRO User Set 1
User Set 2
User Set 3
Default
a2A4508-20ucBAS User Set 1
User Set 2
User Set 3
Default
a2A4508-20ucPRO User Set 1
User Set 2
User Set 3
Default
a2A4508-20umBAS User Set 1
User Set 2
User Set 3
Default
a2A4508-20umPRO User Set 1
User Set 2
User Set 3
Default
a2A5320-7gcBAS User Set 1
User Set 2
User Set 3
Default
a2A5320-7gcPRO User Set 1
User Set 2
User Set 3
Default
a2A5320-7gmBAS User Set 1
User Set 2
User Set 3
Default
a2A5320-7gmPRO User Set 1
User Set 2
User Set 3
Default
a2A5320-23ucBAS User Set 1
User Set 2
User Set 3
Default
a2A5320-23ucPRO User Set 1
User Set 2
User Set 3
Default
a2A5320-23umBAS User Set 1
User Set 2
User Set 3
Default
a2A5320-23umPRO User Set 1
User Set 2
User Set 3
Default
a2A5320-34g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A5320-34g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A5320-52cc User Set 1
User Set 2
User Set 3
Default
a2A5320-52cm User Set 1
User Set 2
User Set 3
Default
a2A5328-4gcBAS User Set 1
User Set 2
User Set 3
Default
a2A5328-4gcPRO User Set 1
User Set 2
User Set 3
Default
a2A5328-4gmBAS User Set 1
User Set 2
User Set 3
Default
a2A5328-4gmPRO User Set 1
User Set 2
User Set 3
Default
a2A5328-15ucBAS User Set 1
User Set 2
User Set 3
Default
a2A5328-15ucPRO User Set 1
User Set 2
User Set 3
Default
a2A5328-15umBAS User Set 1
User Set 2
User Set 3
Default
a2A5328-15umPRO User Set 1
User Set 2
User Set 3
Default
a2A5328-22g5cBAS User Set 1
User Set 2
User Set 3
Default
a2A5328-22g5mBAS User Set 1
User Set 2
User Set 3
Default
a2A5328-35cc User Set 1
User Set 2
User Set 3
Default
a2A5328-35cm User Set 1
User Set 2
User Set 3
Default
acA640-121gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA640-300gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA640-300gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA640-750uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA640-750um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA720-290gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA720-290gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA720-520uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA720-520um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA800-200gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA800-200gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA800-510uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA800-510um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1280-60gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA1280-60gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1300-60gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA1300-60gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1300-60gmNIR User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1300-75gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1300-75gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1300-200uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1300-200um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1440-73gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1440-73gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1440-220uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1440-220um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1600-20gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA1600-20uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1600-60gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA1600-60gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-25gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA1920-25gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-25uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-25um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-40gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1920-40gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-40uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-40ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA1920-40um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-40umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA1920-48gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1920-48gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-50gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1920-50gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-150uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1920-150um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-155uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA1920-155ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA1920-155um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA1920-155umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA2000-50gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA2000-50gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2000-165uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2000-165um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-25gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA2040-25gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-25gmNIR User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-35gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2040-35gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-55uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2040-55um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-90uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-90um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-90umNIR User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2040-120uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2040-120um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2440-20gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2440-20gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2440-35uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2440-35ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA2440-35um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2440-35umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA2440-75uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2440-75ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA2440-75um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2440-75umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA2500-14gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA2500-14gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2500-14uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2500-14um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2500-20gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2500-20gcMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA2500-20gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA2500-20gmMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA2500-60uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA2500-60um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA3088-16gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA3088-16gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA3088-57uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA3088-57ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA3088-57um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA3088-57umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA3800-10gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color
acA3800-10gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA3800-14uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA3800-14um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4024-8gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4024-8gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4024-29uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4024-29um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4096-11gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4096-11gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4096-30uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4096-30ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4096-30um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4096-30umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4096-40uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4096-40ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4096-40um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4096-40umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4112-8gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4112-8gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4112-20uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4112-20ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4112-20um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4112-20umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4112-30uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA4112-30ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA4112-30um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA4112-30umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
acA5472-5gc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA5472-5gm User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA5472-17uc User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
acA5472-17ucMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Color Raw
Light Microscopy
acA5472-17um User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
acA5472-17umMED User Set 1
User Set 2
User Set 3
Default
High Gain
Auto Functions
Light Microscopy
boA1936-400cc User Set 1
User Set 2
User Set 3
Default
boA1936-400cm User Set 1
User Set 2
User Set 3
Default
boA2448-250cc User Set 1
User Set 2
User Set 3
Default
boA2448-250cm User Set 1
User Set 2
User Set 3
Default
boA2832-190cc User Set 1
User Set 2
User Set 3
Default
boA2832-190cm User Set 1
User Set 2
User Set 3
Default
boA4096-93cc User Set 1
User Set 2
User Set 3
Default
boA4096-93cm User Set 1
User Set 2
User Set 3
Default
boA4096-180cc User Set 1
User Set 2
User Set 3
Default
boA4096-180cm User Set 1
User Set 2
User Set 3
Default
boA4112-68cc User Set 1
User Set 2
User Set 3
Default
boA4112-68cm User Set 1
User Set 2
User Set 3
Default
boA4500-45cc User Set 1
User Set 2
User Set 3
Default
boA4500-45cm User Set 1
User Set 2
User Set 3
Default
boA4504-100cc User Set 1
User Set 2
User Set 3
Default
boA4504-100cm User Set 1
User Set 2
User Set 3
Default
boA5120-150cc User Set 1
Default
boA5120-150cm User Set 1
Default
boA5120-230cc User Set 1
Default
boA5120-230cm User Set 1
Default
boA5320-150cc User Set 1
User Set 2
User Set 3
Default
boA5320-150cm User Set 1
User Set 2
User Set 3
Default
boA5328-100cc User Set 1
User Set 2
User Set 3
Default
boA5328-100cm User Set 1
User Set 2
User Set 3
Default
boA6500-36cc User Set 1
User Set 2
User Set 3
Default
boA6500-36cm User Set 1
User Set 2
User Set 3
Default
boA8100-16cc User Set 1
User Set 2
User Set 3
Default
boA8100-16cm User Set 1
User Set 2
User Set 3
Default
boA9344-30cc User Set 1
Default
boA9344-30cm User Set 1
Default
boA9344-70cc User Set 1
Default
boA9344-70cm User Set 1
Default
boA13440-17cm User Set 1
User Set 2
User Set 3
Default
daA720-520uc User Set 1
User Set 2
User Set 3
Default
daA720-520um User Set 1
User Set 2
User Set 3
Default
daA1280-54uc User Set 1
User Set 2
User Set 3
Default
daA1280-54um User Set 1
User Set 2
User Set 3
Default
daA1440-220uc User Set 1
User Set 2
User Set 3
Default
daA1440-220um User Set 1
User Set 2
User Set 3
Default
daA1600-60uc User Set 1
User Set 2
User Set 3
Default
daA1600-60um User Set 1
User Set 2
User Set 3
Default
daA1920-15um User Set 1
User Set 2
User Set 3
Default
daA1920-30uc User Set 1
User Set 2
User Set 3
Default
daA1920-30um User Set 1
User Set 2
User Set 3
Default
daA1920-160uc User Set 1
User Set 2
User Set 3
Default
daA1920-160um User Set 1
User Set 2
User Set 3
Default
daA2448-70uc User Set 1
User Set 2
User Set 3
Default
daA2448-70um User Set 1
User Set 2
User Set 3
Default
daA2500-14uc User Set 1
User Set 2
User Set 3
Default
daA2500-14um User Set 1
User Set 2
User Set 3
Default
daA3840-45uc User Set 1
User Set 2
User Set 3
Default
daA3840-45um User Set 1
User Set 2
User Set 3
Default
dmA720-290gc User Set 1
User Set 2
User Set 3
Default
dmA720-290gm User Set 1
User Set 2
User Set 3
Default
dmA1440-73gc User Set 1
User Set 2
User Set 3
Default
dmA1440-73gm User Set 1
User Set 2
User Set 3
Default
dmA1920-51gc User Set 1
User Set 2
User Set 3
Default
dmA1920-51gm User Set 1
User Set 2
User Set 3
Default
puA1280-54uc User Set 1
User Set 2
User Set 3
Default
puA1280-54um User Set 1
User Set 2
User Set 3
Default
puA1600-60uc User Set 1
User Set 2
User Set 3
Default
puA1600-60um User Set 1
User Set 2
User Set 3
Default
puA1920-30uc User Set 1
User Set 2
User Set 3
Default
puA1920-30um User Set 1
User Set 2
User Set 3
Default
puA2500-14uc User Set 1
User Set 2
User Set 3
Default
puA2500-14um User Set 1
User Set 2
User Set 3
Default

サンプルコード#

ace Classic/U/L GigEカメラ#
// Load the High Gain user set
camera.UserSetSelector.SetValue(UserSetSelector_HighGain);
camera.UserSetLoad.Execute();
// Load the User Set 1 user set
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetLoad.Execute();
// Adjust some camera settings
camera.Width.SetValue(600);
camera.Height.SetValue(400);
camera.ExposureTime.SetValue(3500.0);
// Save the settings in User Set 1
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetSave.Execute();
// Designate User Set 1 as the startup set
camera.UserSetDefaultSelector.SetValue(UserSetDefaultSelector_UserSet1);
INodeMap& nodemap = camera.GetNodeMap();
// Load the High Gain user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("HighGain");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Load the User Set 1 user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Adjust some camera settings
CIntegerParameter(nodemap, "Width").SetValue(600);
CIntegerParameter(nodemap, "Height").SetValue(400);
CFloatParameter(nodemap, "ExposureTime").SetValue(3500.0);
// Save the settings in User Set 1
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetSave").Execute();
// Designate User Set 1 as the startup set
CEnumParameter(nodemap, "UserSetDefaultSelector").SetValue("UserSet1");
// Load the High Gain user set
camera.Parameters[PLCamera.UserSetSelector].SetValue(PLCamera.UserSetSelector.HighGain);
camera.Parameters[PLCamera.UserSetLoad].Execute();
// Load the User Set 1 user set
camera.Parameters[PLCamera.UserSetSelector].SetValue(PLCamera.UserSetSelector.UserSet1);
camera.Parameters[PLCamera.UserSetLoad].Execute();
// Adjust some camera settings
camera.Parameters[PLCamera.Width].SetValue(600);
camera.Parameters[PLCamera.Height].SetValue(400);
camera.Parameters[PLCamera.ExposureTime].SetValue(3500.0);
// Save the settings in User Set 1
camera.Parameters[PLCamera.UserSetSelector].SetValue(PLCamera.UserSetSelector.UserSet1);
camera.Parameters[PLCamera.UserSetSave].Execute();
// Designate User Set 1 as the startup set
camera.Parameters[PLCamera.UserSetDefaultSelector].SetValue(PLCamera.UserSetDefaultSelector.UserSet1);
/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
/* Load the High Gain user set */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetSelector", "HighGain");
CHECK(errRes);
errRes = PylonDeviceExecuteCommandFeature(hdev, "UserSetLoad");
CHECK(errRes);
/* Load the User Set 1 user set */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetSelector", "UserSet1");
CHECK(errRes);
errRes = PylonDeviceExecuteCommandFeature(hdev, "UserSetLoad");
CHECK(errRes);
/* Adjust some camera settings */
errRes = PylonDeviceSetIntegerFeature(hdev, "Width", 600);
CHECK(errRes);
errRes = PylonDeviceSetIntegerFeature(hdev, "Height", 400);
CHECK(errRes);
errRes = PylonDeviceSetFloatFeature(hdev, "ExposureTime", 3500.0);
CHECK(errRes);
/* Save the settings in User Set 1 */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetSelector", "UserSet1");
CHECK(errRes);
errRes = PylonDeviceExecuteCommandFeature(hdev, "UserSetSave");
CHECK(errRes);
/* Designate User Set 1 as the startup set */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetDefaultSelector", "UserSet1");
CHECK(errRes);
# Load the High Gain user set
camera.UserSetSelector.Value = "HighGain"
camera.UserSetLoad.Execute()
# Load the User Set 1 user set
camera.UserSetSelector.Value = "UserSet1"
camera.UserSetLoad.Execute()
# Adjust some camera settings
camera.Width.Value = 600
camera.Height.Value = 400
camera.ExposureTime.Value = 3500.0
# Save the settings in User Set 1
camera.UserSetSelector.Value = "UserSet1"
camera.UserSetSave.Execute()
# Designate User Set 1 as the startup set
camera.UserSetDefaultSelector.Value = "UserSet1"
その他のカメラ#
// Load the High Gain user set
camera.UserSetSelector.SetValue(UserSetSelector_HighGain);
camera.UserSetLoad.Execute();
// Load the User Set 1 user set
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetLoad.Execute();
// Adjust some camera settings
camera.Width.SetValue(600);
camera.Height.SetValue(400);
camera.ExposureTime.SetValue(3500.0);
// Save the settings in User Set 1
camera.UserSetSelector.SetValue(UserSetSelector_UserSet1);
camera.UserSetSave.Execute();
// Designate User Set 1 as the startup set
camera.UserSetDefault.SetValue(UserSetDefault_UserSet1);
INodeMap& nodemap = camera.GetNodeMap();
// Load the High Gain user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("HighGain");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Load the User Set 1 user set
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetLoad").Execute();
// Adjust some camera settings
CIntegerParameter(nodemap, "Width").SetValue(600);
CIntegerParameter(nodemap, "Height").SetValue(400);
CFloatParameter(nodemap, "ExposureTime").SetValue(3500.0);
// Save the settings in User Set 1
CEnumParameter(nodemap, "UserSetSelector").SetValue("UserSet1");
CCommandParameter(nodemap, "UserSetSave").Execute();
// Designate User Set 1 as the startup set
CEnumParameter(nodemap, "UserSetDefault").SetValue("UserSet1");
// Load the High Gain user set
camera.Parameters[PLCamera.UserSetSelector].SetValue(PLCamera.UserSetSelector.HighGain);
camera.Parameters[PLCamera.UserSetLoad].Execute();
// Load the User Set 1 user set
camera.Parameters[PLCamera.UserSetSelector].SetValue(PLCamera.UserSetSelector.UserSet1);
camera.Parameters[PLCamera.UserSetLoad].Execute();
// Adjust some camera settings
camera.Parameters[PLCamera.Width].SetValue(600);
camera.Parameters[PLCamera.Height].SetValue(400);
camera.Parameters[PLCamera.ExposureTime].SetValue(3500.0);
// Save the settings in User Set 1
camera.Parameters[PLCamera.UserSetSelector].SetValue(PLCamera.UserSetSelector.UserSet1);
camera.Parameters[PLCamera.UserSetSave].Execute();
// Designate User Set 1 as the startup set
camera.Parameters[PLCamera.UserSetDefault].SetValue(PLCamera.UserSetDefault.UserSet1);
/* Macro to check for errors */
#define CHECK(errc) if (GENAPI_E_OK != errc) printErrorAndExit(errc)
GENAPIC_RESULT errRes = GENAPI_E_OK;  /* Return value of pylon methods */
/* Load the High Gain user set */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetSelector", "HighGain");
CHECK(errRes);
errRes = PylonDeviceExecuteCommandFeature(hdev, "UserSetLoad");
CHECK(errRes);
/* Load the User Set 1 user set */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetSelector", "UserSet1");
CHECK(errRes);
errRes = PylonDeviceExecuteCommandFeature(hdev, "UserSetLoad");
CHECK(errRes);
/* Adjust some camera settings */
errRes = PylonDeviceSetIntegerFeature(hdev, "Width", 600);
CHECK(errRes);
errRes = PylonDeviceSetIntegerFeature(hdev, "Height", 400);
CHECK(errRes);
errRes = PylonDeviceSetFloatFeature(hdev, "ExposureTime", 3500.0);
CHECK(errRes);
/* Save the settings in User Set 1 */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetSelector", "UserSet1");
CHECK(errRes);
errRes = PylonDeviceExecuteCommandFeature(hdev, "UserSetSave");
CHECK(errRes);
/* Designate User Set 1 as the startup set */
errRes = PylonDeviceFeatureFromString(hdev, "UserSetDefault", "UserSet1");
CHECK(errRes);
# Load the High Gain user set
camera.UserSetSelector.Value = "HighGain"
camera.UserSetLoad.Execute()
# Load the User Set 1 user set
camera.UserSetSelector.Value = "UserSet1"
camera.UserSetLoad.Execute()
# Adjust some camera settings
camera.Width.Value = 600
camera.Height.Value = 400
camera.ExposureTime.Value = 3500.0
# Save the settings in User Set 1
camera.UserSetSelector.Value = "UserSet1"
camera.UserSetSave.Execute()
# Designate User Set 1 as the startup set
camera.UserSetDefault.Value = "UserSet1"

pylon Viewerを使用して、パラメーターを簡単に設定することもできます。