コンテンツにスキップ

Basler SLPケーブル、TBL-L/オープン、P#

SLP cable for power and I/O with TBL connector and open end.

Basler SLPケーブル、TBL-L/オープン、P

情報

The cable is suitable for the following products:

  • Basler SLPストロボコントローラー
Order Number Cable Length
2200000330 1.5 m

Cable Drawing#

Cable Drawing

Wiring Information#

Open End Wire Color 機能 Pin Number (TBL)
GND White Ground 1
SLP Comm Brown SLP Comm 4
Black Shielding 1

To daisy-chain two controllers:

  1. Insert the white wire of the cable's open end in the GND pin of the Lighting connector of the first controller.
  2. Insert the brown wire of the cable's open end in the SLP Comm pin of the Lighting connector of the first controller.
  3. Plug the TBL connector in the Camera connector of the second controller.

For more details, see the Basler SLP Strobe Controller topic.

Physical Specifications#

コネクター Würth, TBL 3611
Cable Cross-section 2 x 0.25 mm² (close to AWG 24)
Cable Diameter 4.5 mm
Wire Insulation PVC
Outer Jacket PVC
Minimum Bending Radius 18 mm (4 x cable diameter), fixed installation
Maximum Bending Cycles None (fixed installation only)
Suitable for Drag Chain Applications いいえ
Suitable for Robotics Applications いいえ

Electrical Specifications#

Maximum Operating Voltage See the Basler SLP Strobe Controller topic for the power requirements of the Basler SLP Strobe Controller.
Wire Resistance <1 Ω

Environmental Specifications#

Operating Temperature Range -40–80 °C, not moving

Plug Specifications#

TBL 3611
Contact Resistance 20 mΩ max.
Contact Plating Brass (CuZn)
Plug Insulation Material PA66

概要#

RoHS Compliance はい
CE Conformity はい
UL Conformity いいえ
Warranty 1 year

Before connecting the cable to the controller, read the Basler SLP Strobe Controller topic. This topic contains important safety information as well as information about pin assignments, power requirements, installation and use of the controller.