Basler 2.5GigE Interface Card, 1 Port#
情報
- On Windows, to operate this interface card, you must either install a compatible driver from the Microsoft Driver Store (recommended) or use the correct Intel driver for the Intel I226-V Ethernet controller. You can download the driver from the product page of the 2.5GigE Interface Card, 1 Port, under Specifications / Software. Alternatively, you can also download the latest driver from the Intel website.
- On Linux, the interface card is usually natively supported by the Linux kernel (for example via the igc driver).
主な機能#
- GigE Vision-certified
- オートネゴシエーション
- IEEE 1588 Precision Time Protocol (PTP) clock synchronization
- Wake on LAN (WoL) and UEFI support
- 共有MACアドレス範囲を使用して、pylonにより自動的に検出されます
一般仕様#
| 2.5GigE Interface Card, 1 Port | |
|---|---|
| 注文番号 | 2200002427 |
| Ethernet Controller | Intel KTI226V |
| ポートの数 | 1 |
| ポート | RJ45 |
| Data Rate | 10 Mbps / 100 Mbps / 1 Gbps / 2.5 Gbps |
| 追加のロープロファイルブラケット | いいえ |
| PCIeのバージョンとレーン | 3.1 x1, 5.0 GT/s (compatible with x4/x8/x16) |
| サポートされている規格 | IEEE 802.1bz (2.5GBASE-T and 5GBASE-T; card operates up to 2.5GBASE-T) IEEE 802.3ab (1000BASE-T Gigabit Ethernet) IEEE 802.3u (100BASE-TX Fast Ethernet) IEEE 802.3x (Ethernet flow control) |
| Additional Functions | IEEE 1588 Precision Time Protocol (PTP), UEFI, Wake on LAN (WoL), Jumbo Frame (up to 9.2 kB) |
| Power Supply | via PCIe slot |
| 適合性 | CE, FCC, RoHS, KC Certificates for your 2.5GigE Interface Card For more information, see the Compliance section of the Basler website. |
| 消費電力 | Max. 2.0 W |
| ジャンボフレームの 最大パケットサイズ | Up to 9.2 kB |
ジャンボフレーム
If you want to use the maximum packet size for jumbo frames, set the network adapter to its maximum value as described in the Network Configuration (GigE Cameras) topic. Also set the GevSCPSPacketSize parameter to its maximum size. Bear in mind that most Basler ace 2 cameras only support a packet size of up to 8192 bytes.
LEDステータス#
| State at 2.5 Gbps | State at 1 Gbps | State at 100 Mbps/10 Mbps | 意味 | |
|---|---|---|---|---|
| リンクLED | 緑点灯 | オレンジ色点灯 | Off | Connection to host established |
| ネットワークLED | 緑に点滅 | 緑に点滅 | 緑に点滅 | Network traffic is active |
GigEインターフェースカードの寸法#
環境要件#
Basler GigEインターフェースカードは屋内使用専用です。
| 動作中のハウジング温度 | 0–70 °C (32–158 °F) |
| 保管中のハウジング温度 | -40–85 °C (-40–185 °F) |
| 保管時の湿度 | Maximum 90 % relative humidity, non-condensing at 35 °C |
Allow sufficient air circulation to keep the temperature during operation within the specified range. Additional cooling devices are not normally required, but should be provided if necessary.